Blue Screen problem after upgrading from win7 to win10

Hi,

I have upgraded to windows 10 and found that the system keeps showing "blue screen" every hour.
I had upgraded all drivers and no help.

Please help.

HarryHARRY-PC-04_13_2016_Wed_111011_84.zip

Harry, there are several possible causes, and thus there are several possible solutions. This one MIGHT work for you.

Get into Device Manager--Display Adapters--your video card. Find the tab labeled "Events," and select the date that Windows 10 was installed. If it tells you that the driver was not completely installed, you need to SET A SYSTEM RESTORE POINT, and uninstall the driver. Do not delete the driver. 10 will automatically install a generic driver, so your screen won't go black. Reboot. It might ask if you want to install the latest driver and it might do it automatically. Go back to Events and select the last action to see if the driver was re-installed correctly. Either way, you will still need to reboot.

If your video driver was installed correctly, then your problem lies elsewhere.

Thank you Vince! I have done that. But it's still the same. Blue screen once last 3 hours.

Please run CPU-Z | Softwares | CPUID, open it and make screenshots of the following tabs

• CPU
• Mainboard
• Memory
• SPD*
• Graphics

*SPD shows the details of each module, you can show the details by choosing different slots in the left upper corner.
Please make screenshots of each module.

Please post each screenshot in your next reply/replies.

Diagnostic Test

 DRIVER VERIFIER

   Warning

Please make a backup of your important files and get your rescue media or create one.
Please create a restore point.

Please follow this tutorialto run driver verifier.

Some windows drivers are blamed in a few crashes, but that usually means that a 3rd party driver is actually the cause.
Driver verifier stresses your drivers and will crash your pc if any driver fails due to a violation.

Driver verifier should be performed for a max of 48 hours, or when you have a bluescreen, whatever comes first.

If driver verifier has found a violation and you can't get back into windows normally, try to boot into safe mode and reset in safe mode driver verifier, or in the troubleshooting options open command prompt and type verifier /reset.

   Note

Your system will act very sluggishly while driver verifier is enabled, this is normal as your drivers will be being subjected to heavy testing in order to make them crash.