Location:
State:
Carrier
Country
Status
Home » Windows » BSOD Win 10 Help

BSOD Win 10 Help


Hey i got BSOD sometime and other time PC Just Close and Reopen by it self .

Thx to Help me to fix that

(sorry for me English i am a French guy )
  • XPURX-PC-2016-01-28_124309,16.zip (484.7 KB, 1 views)

The errors are 0x124 WHEA_UNCORRECTABLE_ERROR (Windows Hardware Error Architecture)
This means that there are problems with your hardware, but this error is also caused by overclocking, faulty drivers or BIOS problems.



STOP 0x124 Troubleshooting
Read carefully before proceeding.


   Warning
If you're overclocking your system, revert back to stock clocks now.

   Note
Test the system once the overclock is removed before continuing with the steps outlined below.


Part One: CPU Stress Test
Part Two: MemTest86+ RAM Diagnostic
Part Three: Hard Drive Diagnostics
Part Four: GPU Stress Test




ONE
 CPU TEST

Run Prime95 and/or IntelBurenTestto stress test your CPU. Prime95 - Stress Test Your CPU - Windows 10 blog & CPU - Stress Test Using IntelBurnTest - Windows 7 Help blog

   Warning
Your CPU temperatures will rise quickly while under this stress test. Keep a keen eye on them and abort the test if overheating occurs.





TWO
 RAM TEST

Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 blog

   Note


MemTest86+ needs to be run for at least 8 passesfor conclusive results. Set it running before you go to bed and leave it overnight. We're looking forzeroerrors here. Even a single error will indicate RAM failure.





THREE
 HDD TEST

Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help blog
Run following tests
  1. Short Drive Self Test
  2. Short generic
  3. Long generic

If the short generic fails, no need for the long generic.

   Note
Do not run SeaTools on an SSD as the results will be invalid.


Run chkdsk
Disk Check - Windows 7 Help blog

Run HDTune to
  • scan for errors, no quick scan but full scan
  • check the health,
  • benchmark.

It may take some time, but please take the time you need to perform it properly.
Let me know what the results are
  • of the error scan,
  • make a screenshot of the health of every hard drive and post the screenshots,
  • post screenshots with the benchmark of the
    • transfer rate,
    • access time,
    • burst rate,
    • cpu usage.





FOUR
 GPU TEST

Run Furmark to stress test your GPU. FurMark - GPU Stress Test - Windows 10 blog

   Note
Run Furmark for around 30 minutes.

   Warning
Your GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them and abort the test if overheating occurs.


Please fill in your system specs
Please follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely.
How to fill in your system specs:


BSOD Win 10 Help