Location:
State:
Carrier
Country
Status

Custom Built PC - BSOD During Windows 10 Installation


I'm having ongoing issues with getting BSODs while attempting to do a clean install of Windows 10 on a new PC that I just built. Here are the specs:

CPU: AMD FX-9370
MB: Gigabyte GA-990FX-GAMING
GPU: Nvidia Geforce GTX 770
HDD: 240GB OCZ Trion 150 SSD
RAM: 2x8GB Crucial Ballistix Sport DDR3-1600
PSU: Corsair CX600M
Heatsink: Corsair H100i V2

Here is the background on what I've tried so far. Initially, I installed everything and booted into the bios to make sure the RAM and HD were recognized as well as checking the CPU temp. I didn't adjust any settings within the bios. Everything looked good, so from another computer, I used the windows download tool to create a bootable USB to install Windows 10. Booted from USB, got to the screen where you select the drive you want to install windows to and then it started copying and preparing files. Somewhere around 50% of preparing files, I received a BSOD. I believe it was a CRITICAL_PROCESS_DIED error. So I rebooted and tried again. It got a little further this time, somewhere around 80%, and then another BSOD.

I figured that maybe I had a bad installation USB so I used the tool to download and create another USB and tried it again. This time, I got all the way through the installation but every time it tried to boot, I was getting a SYSTEM_SERVICE_EXCEPTION. So, I took everything apart, re-seated the ram, video card, processor and all connections (sata, usb, power, etc). Booted again and tried to install and this time, I couldn't even get to selecting the drive, it gave me a CRITICAL_PROCESS_DIED bsod right after selecting the version of windows to install (choice between Win 10 Home or Pro).

So, I've started replacing parts one by one to see if something else was bad but all installations are failing during the step of preparing files for installation, with one of the following errors:
CRITICAL_PROCESS_DIED
SYSTEM_SERVICE_EXCEPTION
ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY
KMODE_EXCEPTION_NOT_HANDLED

These are the items that I've swapped out for troubleshooting:
Motherboard -> replaced with another new GA-990FX-GAMING board
HDD -> Swapped with a 120GB PNY CS1311 SSD
RAM -> Tried installing with only 1 stick installed at a time, swapped between the two I have

Tonight I'm going to try and load all available drivers for the MB, Video Card and HD (if available) prior to the installation. I already checked that I have the latest BIOS version as well. Any other thoughts on what might be going or suggestions of things to try? I'm sure the next question is going to be to provide logs from the BSOD, but how do I do that without the installation completing and being able to boot into windows?

Please post here: Forum: BSOD Crashes and Debugging.

Follow the directions at the top of the forun and top of each thread or post:



I suggest just copy and paste all the info in your post here into the BSOD thread.

Have you tried a different USB port.........

Sounds like a driver error and since this is a new build I am thinking that you might have a problem with the boards native drivers that could be causing a problem with the USB itself.......

The Crash Crew here are great and once you provide the requested information as asked above you will get to the root of the problem and a sound solution.....of that I am confident......

So it actually ended up being that both sticks of ram were bad, so even when I had taken one out and then swapped them, I was still getting BSODs. I ended up pulling a 2GB stick out of my older computer and then the installation went fine and everything booted up ok. Just went back and exchanged those sticks and now everything is working perfectly.

Custom Built PC - BSOD During Windows 10 Installation