Just did a fresh install a couple days ago, and still getting multiple BSOD`s. I have basicly just let the rig sit there with the power on to see if it was stable. It was not....
I have not installed any drivers or anything myself. Just webbrowsers, spotify and fan control software from ASrock
I sure hope someone is able to understand what is going on
DESKTOP-9A0MGS7-07-Oct-16_101952_34.zip
Hi Tharayman,
Welcome to the 10blogDiagnostic TestRAM TEST
Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 blogNote
MemTest86+ needs to be run for at least 8 complete passesfor conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zeroerrors here. Even a single error will indicate RAM failure.
Make a photo of the result and post it.
Addition:
If errors show up you can stop the test, remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.
If errors show up and you see them a lot later, no problem, the errors don't affect the test.
Please fill in your system specsPlease follow this tutorialand download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely including PSU, cooling and other used stuff like mouse, keyboard, monitor, case, etc.
The PSU, cooling and other stuff are NOT mentioned in the tool.
In the left corner below in your post you find 'My System Specs'. After clicking it you can find a link a little below that says 'Update your System Spec', click on this link to get to the page where you can fill in your system specs.
Thank you - thank you!
I frogot to mention that I have already ran Memtest for a whole day. Only good passes. So no ram issues I think.
Have updated my system specs now
Did you run any other test that isn't yet mentioned?
Please specify what PSU you have, that may be important.
Naaah Just the windows performance monitor test. Did not tell me much...
The PSU is a EVGA supernova 1300 G2. About 18 months old, but not much used realy...
It is better to run MemTest86+ as it is a much better test than the built-in feature.
That is the one I ran. About 12 hours. Should I run it longer?
I wasn't 100% awake when posting it.
If you ran MemTest86+ for ~12h instead of a day then run it again, with 16GB you won't reach 8 passes in 12h.
I honestly can not remember the number of passes, but are you sure? Cause right now it has done 4 passes in a little over 3 hours. Anyways set it do 16 complete passes, so I guess we will know if the sticks are okay after that?I wasn't 100% awake when posting it.
If you ran MemTest86+ for ~12h instead of a day then run it again, with 16GB you won't reach 8 passes in 12h.
Many have done 8 passes on 8GB in around 13h including myself, no reason to not be sure.
