Location:
State:
Carrier
Country
Status
Home » Windows » follow up

follow up


Hi, attached are two zip files.
Did them 3 min apart, but the first one is twice the size, that'is why I decided to upload them both.

Thanks in advance for your help.
  • ACCOUNTING-29_11_2015_112450_21.zip (419.3 KB, 1 views)
  • ACCOUNTING-29_11_2015_112155_87.zip (981.7 KB, 1 views)

Hi Petar Stoychev,

Please test your memory using MemTest86+
If MemTest86+ comes with zero errors, run driver verifier to attempt to find drivers.
Note that driver verifier sometimes doesn't show any driver in the dumps, this is the reaon why driver verifier may need to be enabled a few times.



Diagnostic Test
 RAM TEST

Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 blog

   Note


MemTest86+ needs to be run for at least 8 passesfor conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zeroerrors here. Even a single error will indicate RAM failure.



Diagnostic Test
 DRIVER VERIFIER

   Warning
Please make a backup of your important files and get your rescue media or create one.
Please create a restore point.

Please follow this tutorialto run driver verifier.

Driver verifier stresses your drivers and will crash your pc if any driver fails due to a violation.

Driver verifier should be performed for a max of 48 hours, or when you have a bluescreen, whatever comes first.

If driver verifier has found a violation and you can't get back into windows normally, try to boot into safe mode and reset in safe mode driver verifier, or in the troubleshooting options open command prompt and type verifier /reset.

   Note
Your system will act very sluggishly while driver verifier is enabled, this is normal as your drivers will be being subjected to heavy testing in order to make them crash.

Code:
Probably caused by : memory_corruption

Hi,

Memtest did 12 clean passes.


The computer started normally after running driver verifier with the required settings.

Here is another set of logs with crashes under verifier.
  • ACCOUNTING-07_12_2015__92135_34.zip (551.6 KB, 2 views)

Please check the manufacturer of your mainboard, ECS, for BIOS updates
ECS > GF7050VT-M5 (V1.0/V1.0A)
Code:
BiosMajorRelease = 8 BiosMinorRelease = 15 BiosVendor = American Megatrends Inc. BiosVersion = 080015  BiosReleaseDate = 12/05/2007

follow up