Corsair LPX DDR4 OC settings

Hi all,


I have the following RAM: Vengeance® LPX 16GB (2x8GB) DDR4 DRAM 2400MHz C14 Memory Kit - Black (CMK16GX4M2A2400C14) in my system with the XMP profile active.

I've Overclocked these to 2800Mhz with the following timings: 14-15-15-28 1T @ 1.25v


All is stable but would like to know if these setting are OK to run all the time?


Cheers


worf105

Should be fine, it's stable so you are good to go.

thanks @Dude

I am worried about the voltage over long term usage.

From what I have read, you can go up to 1.4ish max so I think 1.25 is good

From what I have read, you can go up to 1.4ish max so I think 1.25 is good

cheers @Dude. now make my GTX1070 go faster lol.

cheers @Dude. now make my GTX1070 go faster lol.

Try adding about 30 more to the memory OC and you should hit 22K

Try adding about 30 more to the memory OC and you should hit 22K

I am at +753 and any higher Fire Strike ends with 0 points.

I have had that, then slid the memory up to 800 and it ran fine. Try +800 mem, and drop you voltage slider to +47

I have had that, then slid the memory up to 800 and it ran fine. Try +800 mem, and drop you voltage slider to +47

will do as you suggest @Dude. let you know how I get on.

will do as you suggest @Dude. let you know how I get on.

Never worked, less than last run. Zotac Firestorm is rubbish. Wil try MSI afterburner and report back.