BSOD WHEA UNCORRECTABLE or DRIVER IQL NOT EQUAL

The BSOD varies from time to time and is almost always WHEA UNCORRECTABLE and some referenced file (usually different, examples are intelppm.sys and netio.sys) I replaced my wife's motherboard with one from another machine that I had and did a clean install of a legitimate copy of Windows 10 Pro. It has been crashing ever since. Although mostly at random times and almost always within a half an hour of being booted, it can be guaranteed if I initiate any download through Steam (how odd, right?)

I have checked for unsigned drivers, driver conflicts, mismatches, and the like. I have checked for integrity with SFC /SCANNOW and run some diagnostics from the Windows Deployment Toolkit, all to no avail. I have attached a series of the logs as well. Any help would be greatly appreciated!!

This motherboard did work in other devices directly before being placed into this one, so the hardware seems to be functional.

• debug-KIBBLESNBITS2PC-1313.zip (574.9 KB, 1 views)

The crashes are kinda all over the place what points to many problems from drivers to hardware.

STOP 0x124 Troubleshooting

Read carefully before proceeding.

   Warning

If you're overclocking your system, revert back to stock clocks now.

   Note

Test the system once the overclock is removed before continuing with the steps outlined below.

Part One: CPU Stress Test
Part Two: MemTest86+ RAM Diagnostic
Part Three: Hard Drive Diagnostics
Part Four: GPU Stress Test

ONE

 CPU TEST

Run Prime95 and/or IntelBurnTest to stress test your CPU. Prime95 - Stress Test Your CPU - Windows 10 blog & CPU - Stress Test Using IntelBurnTest - Windows 7 Help blog

   Warning

Your CPU temperatures will rise quickly while under this stress test. Keep a keen eye on them and abort the test if overheating occurs.

TWO

 RAM TEST

Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 blog

   Note

MemTest86+ needs to be run for at least 8 complete passesfor conclusive results. Set it running before you go to bed and leave it overnight. We're looking forzeroerrors here. Even a single error will indicate RAM failure.

THREE

 HDD TEST

Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help blog
Run following tests

1. Short Drive Self Test
2. Short generic
3. Long generic

If the short generic fails, no need for the long generic.

   Note

Do not run SeaTools on an SSD as the results will be invalid.

Run chkdsk
Disk Check - Windows 7 Help blog

Run HDTune to

• scan for errors, no quick scan but full scan
• check the health,
• benchmark.

It may take some time, but please take the time you need to perform it properly.
Let me know what the results are

• of the error scan,
• make a screenshot of the health of every hard drive and post the screenshots,
• post screenshots with the benchmark of the
  
  • transfer rate,
  • access time,
  • burst rate,
  • cpu usage.

FOUR

 GPU TEST

Run Furmark to stress test your GPU. FurMark - GPU Stress Test - Windows 10 blog

   Note

Run Furmark for around 30 minutes.

   Warning

Your GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them and abort the test if overheating occurs.