New build, daily BSOD

Hi guys. I recently built a new computer and it's been giving me a lot of trouble. I get a crash that says whea uncorrectable error probably twice a day.

Primarily I use the computer for gaming.

I'm not sure if this is a problem I can correct myself or if there part is bad and needs to be replaced. Oddly, when booting the screen has a green tint to it when it should be black. As soon as Windows starts the green disappears and everything looks normal. Then bam, another crash.

Any help would be greatly appreciated.

• TK-421-Wed_02_03_2016__00540_32.zip (517.7 KB, 1 views)

The errors are 0x124 WHEA_UNCORRECTABLE_ERROR (Windows Hardware Error Architecture)
This means that there are problems with your hardware, but this error is also caused by overclocking, faulty drivers or BIOS problems.
Please make sure your BIOS is loaded for optimal default settings, or pull the cmos battery and put it back.

STOP 0x124 Troubleshooting

Read carefully before proceeding.

   Warning

If you're overclocking your system, revert back to stock clocks now.

   Note

Test the system once the overclock is removed before continuing with the steps outlined below.

Part One: CPU Stress Test
Part Two: MemTest86+ RAM Diagnostic
Part Three: Hard Drive Diagnostics
Part Four: GPU Stress Test

ONE

 CPU TEST

Run Prime95 and/or IntelBurenTest to stress test your CPU. Prime95 - Stress Test Your CPU - Windows 10 blog & CPU - Stress Test Using IntelBurnTest - Windows 7 Help blog

   Warning

Your CPU temperatures will rise quickly while under this stress test. Keep a keen eye on them and abort the test if overheating occurs.

TWO

 RAM TEST

Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 blog

   Note

MemTest86+ needs to be run for at least 8 passesfor conclusive results. Set it running before you go to bed and leave it overnight. We're looking forzeroerrors here. Even a single error will indicate RAM failure.

THREE

 HDD TEST

Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help blog
Run following tests

1. Short Drive Self Test
2. Short generic
3. Long generic

If the short generic fails, no need for the long generic.

   Note

Do not run SeaTools on an SSD as the results will be invalid.

Run chkdsk
Disk Check - Windows 7 Help blog

Run HDTune to

• scan for errors, no quick scan but full scan
• check the health,
• benchmark.

It may take some time, but please take the time you need to perform it properly.
Let me know what the results are

• of the error scan,
• make a screenshot of the health of every hard drive and post the screenshots,
• post screenshots with the benchmark of the
  
  • transfer rate,
  • access time,
  • burst rate,
  • cpu usage.

FOUR

 GPU TEST

Run Furmark to stress test your GPU. FurMark - GPU Stress Test - Windows 10 blog

   Note

Run Furmark for around 30 minutes.

   Warning

Your GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them and abort the test if overheating occurs.