Every time I boot up my PC I get constant BSOD errors stretching from KMODE_EXEPTION_NOT_HANDLED to SYSTYM_SERVICE_EXEPTION, CRITICAL_STRUCTURE_CORRUPTION and countless others, if you can please help me, my file is attached.
Hi mocadedhed,
The amount of bluescreens and some specific error codes tells me we first need to rule out the hardware: Hardware Diagnostics (start with the bootable tests)NoteWhen you run the memory bootable test, it is recommended to run MemTest86+ for 8 complete passesstraight.
Thanks. I ram memtest86 for 4 passes. I'll do it again for the 8 you mention. I've also run the DDU tool to remove the NVIDIA Driver and reinstall the most current 359 version. I'll post back when memtest86 has completed the 8 runs. Thanks.
Hi axe0 - I've run memtest86 and I let it run through and it has passed 100%. I think I am going to try to remove the video card and see if I get any errors. it's possible that there's some kind of defect in the graphics card - any other suggestions for testing any additional components? I am using a usb keyboard and mouse. not other peripherals are attached. thanks in advance for any help!
I've booted without the GeForce card installed and used onboard graphics of Asrock H81 instead. and I'm still getting BSOD errors. System Service Exception.
Have you performed other hardware tests then the memory test?
How many passes have been completed with memtest86+?
I can't do the HDD diagnostic as it requires a cdrom drive - I don't have one installed on this system. I tried running the Seagate diagnostic tool that runs in windows, but got the BSOD. Is there another drive testing utility that you'd recommend I use - even though I don't have a CDRom on this system? Thanks.
A USB will work too with those tests.
8 passes on the memory test. Now that I know I can use a usb on the hard drive diag i'll try that next. thanks!
Hi axe0, I have gotten the Seagate SeatTools bootable to a USB drive. when I boot from it the message I get back is that there's no controller found and no HDD. I've inspected the connections of the cable and they seem fine. any ideas?
